Каким бы ни была сфера применения шины, работы по их монтажу и демонтажу являются очень опасными процессами. Эти работы должны выполняться авторизованными сервисными центрами с использованием соответствующих инструментов и оборудования, используемых опытными специалистами.
Lubricate beads and rim.
The tire inflation air has to be moisture free. Pry the first bead over the rim flange and only after that, continue with the second bead.
Turn the assembly, inflate with no more than 5psi pressure and complete inflation process using a safety case.
Any information regarding rotation direction or outer sides stated on the sidewall should be taken into consideration.
Tire impact damage or road damage includes tears, punctures, cuts and other physical injuries that damage the carcass of the tire when it directly contacts with an object. Bulges or bubbles can appear on the sidewall of your tire when that kind of damage happens. This means that the cords within the tire structure are damaged and air may be leaking through the carcass or the body of the tire.
These kinds of damages generally happen when the tire directly passes over a sharp object or driving on a tough road for an excessive amount of time. Reducing the speed on bad conditioned roads has a considerable effect on protecting the tires from impact damages.
If you notice impact damage on your tire, you should change the tire with the spare one immediately and visit the nearest tire service.
Вождение транспортного средства по острым предметам (стекло, камень, гвоздь и т.п.) или по неровной поверхности может привести к порезам на шине. Для избежания подобных проблем настоятельно рекомендуется не управлять автомобилем в неподходящих условиях.
Sharp objects can cause deep damages and punctures on the tire. In that case the air in the tire air swiftly and the tire loses its integrity.
Probable causes for chafer separation are improper bead seating, improper rim size, overload condition, under inflation, impact or possible manufacturing conditions.
Обычно возникает в результате чрезмерного воздействия чрезмерного нагрева, вызванного частым резким торможением, неправильно отрегулированных тормозов и неисправной тормозной системы или недостаточного воздушного потока вокруг тормозов.
It occurs as a result of a loss in inflation pressure. As the condition progresses, the diagnosis of the root cause becomes difficult – if not impossible.
Это связано с недостаточной накачкой, перегрузкой или чрезмерной скоростью, поскольку данные условия могут привести к перегреву. Чрезмерный нагрев может ослабить или повредить корды или состав резины что, в свою очередь, может привести к отделению слоев.